Electronic Access - CAD&A, Vol. 5, Nos. 1-4
ISSN 1686-4360
Computer-Aided Design and Applications, Vol. 5, Nos. 1-4, 2008
Frontal matters
Haptic Rendering of Three-dimensional Heterogeneous Fine Surface Features, pp 1-16
Y. H. Chen, L. L. Lian and X. J. He
Extracting Geometric Features from Clouds of Points Using Sweeping, pp 17-29
D. Yoon, E. Ohou, J. Shen and H. Shou
A Novel Low-Cost Product Data Management System, pp 30-38
L. Xie, H. Ching and R. Du
Compliant Needle Modeling and Steerable Insertion Simulation, pp 39-46
L. Tang, Y. Chen and X. He
Interactive Deformation of 3D Mesh Models, pp 47-57
H. Masuda and K. Ogawa
Automake Physics: Random Craft Production, pp 58-65
U. Ertu, A. Paul and M. Justin
Axial Deformation with Controllable Local Coordinate Frames, pp 66-76
C. Y. Pui and K. C. Hui
Input of Log-aesthetic Curve Segments with Inflection End Points, pp 77-85
K. T. Miura, S. Agari, Y. Kawata, M. Fujisawa and F. Cheng
Reverse Engineering Polygonal Meshes Using Discrete Differential Geometry, pp 86-98
R. A. Vorray, G. O’Driscoll and A. Steed
Reconstruction of Lines in a Ship Hull with B-Splines, pp 99-109
F. Pérez
Virtual Manufacturing to Design a Manufacturing Technology, pp 110-120
F. Wang, K.-Z. Chen and X.-A. Feng
Interactive Control of Planar Class A Bézier Curves using Logarithmic Curvature Graphs, pp 121-130
N. Yoshida, T. Hiraiwa and T. Saito
Haptic 3D Mesh Painting based on Dynamic Subdivision, pp 131-141
Y. Fu and Y. Chen
Multivariate Visualization on Parametric Surfaces, pp 142-152
J. R. Miller
3D Shape Reasoning for Identifying Anatomical Landmarks, pp 153-160
K. Subburaj, B. Ravi and M. G. Agarwal
Applying Graph Theory and Autonomous Agents to Automate Product Development Processes, pp 161-177
J. J. Cox, G. Roach, J. Daley and J. Amelang
Using Rule Based Design in Engineer to Order Industry: An SME Case Study, pp 178-193
S. R. Chavali, C. Sen, G. M. Mocko and J. D. Summers
Reverse Engineering of Human Body: A B-spline based Heterogeneous Modeling Approach, pp 194-208
A. D. Bhatt and R. M. Warkhedkar
Datum Identification for Tolerances Control on Dense Clouds of Points, pp 209-219
F. Campana and M. Germani
Curvature Computation for Triangular Meshes based on Local Parametrization, pp 220-227
F. Cheng, C. Huang, S. Lai, F. Fan, J. Wang and C. Zhang
Variational Tetrahedral Meshing of Mechanical Models for Finite Element Analysis, pp 228-240
M. Sypkens Smit and W. F. Bronsvoort
Machining Free-Form Surface Cavities Using a Combination of Multi-Axis Machining Methods, pp 241-253
C. G. Jensen, W. E. Red and C. Ernst
Machining Triangular Mesh Surfaces via Mesh Offset Based Tool Paths, pp 254-265
D. O. Yang and H.-Y. Feng
Design by Talking with Computers, pp 266-277
X. Y. Kou and S. T. Tan
5-axis Iso-scallop Tool Paths along Parallel Planes, pp 278-286
C. Tournier and C. Lartigue
Triangular Mesh Deformation based on Dimensions, pp 287-295
H. Date and M. Onosato
Automatic Model Simplification and Reconstruction from Geographic Information System Data, pp 296-306
C. S. Chong and Y. Su
Optimal Quadrangulation of a Strip for Flank Milling, pp 307-315
W.-L. Tsai, C. C. L. Wang, C.-H. Chu and K. Tang
On Reconstructing 3D Feature Boundaries, pp 316-324
V. Stamati and I. Fudos
Placement and Routing in CAD of Standard Cell Arrays by Exploiting the Structure of the Interconnection Graph, pp 325-337
I. Fudos, X. Kavousianos , D. Markouzis and Y. Tsiatouhas
Implementation of Biomechanical Mating Conditions in CAD, pp 338-353
K. J. Nielsen and J. J. Cox
A Learning System to Restore Operations of Isolated Line Segments in 2D Drawings, pp 354-362
M. Tanaka, T. Kaneeda, D. Sasae, J. Fukagawa and R. Yokoi
CAD, Modeling, and Freeform Fabrication of 3D Tissue Constructs for Drug Metabolism Studies, pp 363-370
R. Chang, J. Nam and W. Sun
An Integrated Imaging and BEM for Fast Simulation of Freeform Objects, pp 371-380
X. Chen and H. Zhang
Product Centric CAD Education, pp 381-390
A. D. Spence and T. E. Doyle
A Study on Virtual Reality-based EDM Learning Framework and Effectiveness Analysis, pp 391-400
J. S. Liang
Simulation of a Machining Sequence Using Delmia/Quest Software, pp 401-411
Z. M. Bzymek, M. Nunez, M. Li and S. Powers
Adaptive Slicing for SLS Prototyping, pp 412-423
S. K. Singhal, P. K. Jain and P. M. Pandey
Fixture Feasibility: Methods and Techniques for Fixture Planning, pp 424-433
X. Kang and Q. Peng
Development of a System to Generate Tool Orientation Information for Positional 5-Axis Machining, pp 434-441
J. G. Lee, S. J. Yang, Y. H. Cho, S. K. Yoo and J. W. Park
Near Net-shape Five-axis CL Data Generation by Considering Tool Swept Surface in Face Milling, pp 442-451
J. G. Lee, Y. H. Cho, S. J. Yang and J. W. Park
An Algorithm for Adding Draft Angle to B-spline Surfaces, pp 452-460
K. Schreve
Flank Millable Surface Design with Conical and Barrel Tools, pp 461-470
C. Li, S. Bedi and S. Mann
A Workbench for Geometric Constraint Solving, pp 471-482
R. de Regt, H. A. van der Meiden and W. F. Bronsvoort
Top-Down Archaeology with a Geometric Language, pp 483-496
D. Lucia, F. Martire, A. Paoluzzi and G. Scorzelli
Path Planning of Holonomic and Non-Holonomic Robots Using Bump-Surfaces, pp 497-507
E. K. Xidias, P. N. Azariadis and N. A. Aspragathos
Constructing Triangular Meshes of Minimal Area, pp 508-518
W. Chen, Y. Cai and J. Zheng
Generating Optimal Path by Space-time Geometry, pp 519-525
C. K. Au
A Virtual Environment for Satellite Assembly, pp 526-538
A. Muthaiyan and J. Cecil
Subdivision Based Interpolation with Shape Control, pp 539-549
F. Fan, F. Cheng and S. Lai
Computerizing Conceptual Design without Hindering Creativity, pp 548-556
T. M. M. Shahin
Virtual Porosimeter, pp 557-564
E. Vergés, D. Ayala, S. Grau and D. Tost
Computer-aided Product Design with Performance-Tailored Mesostructures, pp 565-576
Y. Chen and S. Wang
Computer-Aided Design and Applications, Vol. 5, Nos. 1-4, 2008
Back page
